How To Use Flair-It Fittings

Step 1
Slide nut over tubing.

Step 2
Firmly press tubing onto the flair of the fitting
until the tubing rests against the fitting.

Step 3
Slide the nut to the threads and tighten securely onto the fitting.

To permanently by-pass an R.V. 
water heater in which the lines run
 perpendicular to the tank use
a 04912: Permanent By-pass Kit.

To permanently by-pass an R.V. 
water heater in which the lines run
parallel to the back of the tank, 
use 06816's to make the 90 degree
turnout of the water heater and
06910's with a short piece of tubing
between them.

To temporarily by-pass your water heater
for the season use a 04841:Supreme Temporary By-pass Kit.

To use your water pump to circulate your R.V. antifreeze through your water line put a 04910:Pump Converter Winterizing Kit, in between your pump and fresh water tank.

When connecting to
water heaters
use a copper flex-connector
with a 06872.

Use a male adapter when connecting to galvanized, CPVC, or brass.