Search Product Name or No.

Search by Swiftype

Flair-It Plumbing
Flair-It Plumbing

View our extensive plumbing products.

PEX Lock is now available! Our best leak proof connection.

View our cables
7 Way Cords

Keep connected with our 7 Way Trailer Cable With Plug for use on all RV and boat trailers. Heavy duty UL/CSA approved cable. Available in many lengths. Select to see available lengths and pricing. 

Elkhart Supply Corporation

1126 Kent Street

Elkhart Indiana 46514

(574) 264-4156

(800) 456-ESCO

michelle1@escousa.net

 

Official PayPal Seal

Automatic Transfer Switches and Accessories

All orders over 5 pounds will be charged an additional cost for shipping and will be contacted directly by our friendly staff. 

LPT Models

LPT30 and LPT30E Automatic Transfer Switch

*Additional shipping costs apply.

The LPT30 is intended for usage as an electrical transfer switch to automatically switch multiple sources (from one to another), i.e. switching from shoreline to generator power or switching from electronic inverter to shoreline/generator.

 

The LPT30 is primarily designed for installation in conjunction with a generator having a rated output of not larger than 4.5kw, an external power cord having a rated output of not larger than 120VAC, 30A, 1PH, 60HZ and an electronic inverter having a rated output of not larger than 3600 watts.

 

Contractors: General purpose DPDT 30 amp relay

Coil: 110VDC, 2 watts

Time Delay: Custom time delay, 30 seconds nominal may bypass time delay with switch on board

Physical Size: 6" x 6" x 3"

Knockouts: 1/2" and 3/4"

 

Cautions: Install vertically or horizontally in a dry, accessible area.*Maximum service 120 VAC, 30AMPS single phase: must be used with a circuit distribution panel having a main breaker rated 30AMPS-1 Pole, or less. Suitable for installation in conjunction with power supplies having rated outputs not larger than 120VAC, 30AMPS.

Transfer Switch
$301.10
Add to Cart
  • Available
  • Ships within 1-2 days1
LPT30BRD Generator 30A 120V Relay Base with Terminal

*Additional shipping costs apply.

120VAC 30 AMPS/POLE

  • Automatically switches from power cord to generator simply by starting the generator
  • Heavy duty relay assembly will handle 30 amp power cord and up to 4.5kw generator
  • Dependable switching-transfers both hot and neutral legs by heavy duty dpdt relay
  • Designed with a terminal block to simplify wire connectionsBuilt-in time delay allows generator to get up to speed
  • Quick and easy installationDesigned for oem and aftermarket applications

The LPT30BRD is intended for use as an electrical transfer switch to automatically switch multiple sources (from one to another), i.e. switching from shoreline to generator power.


The LPT30BRD is primarily designed for installation in conjunction with a generator having a rated output of no more than 4.5KW and an external power cord having a rated output of no more than 120VAC, 30A, 1PH, 60HZ.

 

CONTACTORS: General purpose DPDT 30 Amp relayRELAY COIL: 110VDC, 2 Watts

PHYSICAL SIZE: 8 1/2” X 8 1/2” X 4 1/2”KNOCKOUTS: Assorted TIME

DELAY: Custom time delay, 30 seconds nominal. Can be bypassed for instant switching.

WEIGHT: 6.60 lbs
Cautions: install vertically or horizontally in a dry, accessible areamaximum service 120VAC, 30AMPS single phase: must be used with a circuit distribution panel having a main breaker rated 30amps-1 pole or smallersuitable for installation in conjunction with power supplies having rated outputs no larger than 120VAC, 30AMPS.

 

View Technical Documents

 

LPT30BRD Transfer Switch
$302.94
Add to Cart
  • Available
  • Ships within 1-2 days1
LPT50E Generator European 50A 220V

*Additional shipping costs apply.

LPT50E Transfer Switch
$424.08
Add to Cart
  • Available
  • Ships within 1-2 days1
LPT50BRD Generator 50A 120/240V Relay Base

*Additional shipping costs apply.

 

120VAC-240VAC 50 AMPS/POLE70 AMP NEUTRAL

  • Automatic transfer switch
  • Automatically switches from power cord to generator
  • Heavy duty relay assembly will handle 50 amp power cord and up to 12kw generator
  • Transfers two hot poles and neutral simultaneously
  • Generator start up delay is provided to allow the generator to get up to speedUtilizes a micro switch on the neutral relay to ensure neutral lines are engaged before the hot lines
  • Designed with dc coiled relays to reduce hum, and terminal blocks to simplify wire connections
  • Quick and easy installation
  • Designed for oem and aftermarket applications

 

The LPT50BRD is intended for use as an electrical transfer switch to automatically switch multiple sources (from one to another), i.e. switching from shoreline to generator power.

 

The LPT50BRD is primarily designed for installation in conjunction with a generator having a rated output of no more than 12KW and an external power cord having a rated output of no more than 240VAC 1PH 60HZ, 2 poles at 50 Amps per pole.

CONTACTORS: General Purpose DPDT 50 Amp relays. 

COIL: 110 VDC 2 Watts.

TIME DELAY: Custom time delay, 30 seconds nominal. Can be bypassed for instant switching.

PHYSICAL SIZE: 8 1/2” X 8 1/2” X 4 1/2” 

KNOCKOUTS: Assorted.WEIGHT: 7.95 lbs. 
CAUTIONS: Install vertically or horizontally in a dry, accessible areaConsult factory before drilling metal caseKeep covered except during wiring as contactors are sensitive to debrisHi-pot with lpt50brd disconnected or hi-pot on load side of switch.

View Technical Documents

LPT50BRD Transfer Switch
$468.93
Add to Cart
  • Available
  • Ships within 1-2 days1
LPT50MRD Generator/Inverter 50A 120V Relay Non UL

*Additional shipping costs apply.

LPT50MRD Transfer Switch
$408.18
Add to Cart
  • Available
  • Ships within 1-2 days1
LPT75CA Generator 75A 120/240V Contactor

*Additional shipping costs apply.

 

120VAC-240VAC 75 AMPS/POLE90 AMP NEUTRAL
Automatic Transfer Switch

  • Automatically switches from power cord to generator
  • Heavy duty relay assembly will handle 50 amp power cord and up to 18kw generator
  • Transfers two hot poles and neutral simultaneously
  • Reliable time delay to allow generator to get up to speed before switching automatically from shoreline to generator power
  • Utilizes an auxiliary switch in combination with a mechanical interlock to ensure power cord is off before generator power is engaged
  • Quick and easy installationDesigned for OEM and aftermarket applications

 

The LPT 75CA is intended for use as an electrical transfer switch to automatically switch multiple sources (from one to another), i.e. switching from shoreline to generator power.

 

The LPT 75CA is primarily designed for installation in conjunction with a generator having a rated output no larger than 18KW, an external power cord having a rated output no larger than 240 VAC, 2 poles 50A per pole, 1PH, 60HZ.

Contactors: 3 Pole N.O. 240VAC, 75 AMPS/POLECoil: 104-120VAC (60HZ, inrush current - 84 watts, sealed - 8 watts)

Auxiliary switch: shoreline release switch 120VAC, N.C.

Time delay: custom time delay, 30 seconds nominal

Physical size: 12” x 8” x 4” Knockouts: assorted

Weight: 12.00 lbs 
Cautions: install vertically or horizontally in a dry, accessible areaconsult factory before drilling metal casekeep covered except during wiring as contactors are sensitive to debrishi-pot with LPT75CA disconnected or hi-pot on load side of switch

View Wiring Diagram

LPT75-CA Transfer Switch
$1,013.44
Add to Cart
  • Available
  • Ships within 1-2 days1
LPT100 ATS - 100A 120/240V Relay Based with Terminal Blocks

*Additional shipping costs apply.

 

Includes the following models:

  • LPT100ATS, 100A 120/240V Relay Based with Terminal Blocks
  • LPT100-MODATS, 100A 120/240V Relay Based with Terminal Blocks MARINE
  • LPT100E-MOD-220VATS, 100A 220V Relay Based with Terminal Blocks EUROPE MARINE
  • LPT100E-220VATS, 100A 220V Relay Based with Terminal Blocks EUROPE
LPT100 Transfer Switch
$1,328.34
Add to Cart
  • Available
  • Ships within 1-2 days1

ES Models

ES3030G Automatic Transfer Switch

*Additional shipping costs apply.

 

The ES3030G is intended for usage as an electrical transfer switch to automatically switch from the main power source (i.e. shoreline) to generator power.

 

Additional shipping costs may apply.

Transfer Switch
$301.10
Add to Cart
  • Available
  • Ships within 1-2 days1
ES3030I Automatic Transfer Switch

*Additional shipping costs apply.

 

The ES3030I Is intended for usage as an electrical transfer switch to automatically switch from the main power source (i.e. shoreline) to inverter power.

 

Additional shipping costs may apply.

Transfer Switch
$259.24
Add to Cart
  • Available
  • Ships within 1-2 days1
ES350 Automatic Transfer Switch for 350A Power Sources

*Additional shipping costs apply.

 

MODEL # ES350 240VAC 50 AMPS/POLE

Automatic Transfer Switch

Automatic switching between shorepower, generator and inverter.

 

  • Designed for rigorous use utilizing two heavy duty contactors rated up to 50 amps
  • 120/240v shoreline, 12kw generator and an inverter relay rated 6kw, 50 amps 120v
  • Transfers both hot and neutral legs simultaneously
  • Designed to shed inverter power loads when used with a 30 amp transfer switch
  • Utilizes both mechanical and electrical interlocks to insure no power feedback
  • Capable of monitoring voltages on both the generator and shore line - specify volt board when ordering
  • Built-in time delay allows generator to get up to speed
  • Quick and easy installation
  • Designed for OEM and aftermarket applications

 

The ES350 is designed to monitor both legs of the generator supply with the generator always being the dominant source. In addition to functioning as a generator time delay (average 30 sec.), the integrated control circuitry monitors the generator supply voltage. Should generator power output drop to 105VAC or less for 5 seconds after the time delay sequence, the control board switches power back to the shore input. If shore power is not available, the ES350 will source inverter power. Once the generator output measures above 105VAC, the ES350 will switch from shore power or inverter power back to generator power.

 

The ES350 is designed for use with generators having a rated output of 50 Amps at 120/240VAC single phase 60 Hz, an external power source (shore cord) of 50 Amps at 120/240VAC single phase 60 Hz and an AC inverter supplying up to 50 Amps at 120VAC.

 

PHYSICAL SIZE: 12” x 10” x 6” 

KNOCKOUTS: Assorted

WEIGHT: 14 lbs

 

Cautions:

  • install according to national electric code
  • install vertically in a dry, ventilated & accessible area
  • keep covered except during wiring as contactors are sensitive to dust and debris
  • when hi-potting coach, disconnect ES350 or hi-pot on load side of switch. This unit has been hi-potted to UL standards at the factory

*Additional shipping costs may apply.

 

Transfer Switch
$1,250.16
Add to Cart
  • Available
  • Ships within 1-2 days1
ES50 Transfer Switches

*Additional shipping costs apply.

Models include:

ES50-SURGE, ES50-VOLT-SURGE, ES50CSA-65N, ES50M-65N

 

The ES50-Volt-Surge (same as ES50-VOLT with Surge Protection)

MODEL # ES50-VOLT-SURGE 240VAC 50 AMPS/POLE

65 AMP NEUTRAL

 

Is an Automatic Transfer Switch that automatically switches from power cord to generator.

 

FEATURES:

  • Heavy duty contactor assembly specifically designed for rigorous use, will handle 50 AMP power cord and up to 12kw generator
  • Transfers both hot and neutral legs simultaneously
  • Utilizes two auxillary switches in combination with a mechanical interlock to ensure power cord is off before generator is on
  • Comes standard with the capability of monitoring voltages on the generator and shore line
  • Built-in time delay allows generator to get up to speed
  • Built-in surge protection against voltage spikes and transient voltages
  • Quick and easy installation
  • Designed for OEM and aftermarket applications

The ES50-VOLT-SURGE is intended for use as an electrical transfer switch to automatically switch multiple sources (from one to another), i.e. switching from shoreline to generator power.

 

The ES50-VOLT-SURGE is primarily designed for installation in conjunction with a generator having a rated output no larger than 12KW, an external power cord having a rated output no larger than 2 pole, 240VAC, 50A, 1PH, 60HZ .

 

CONTACTORS: 3 pole N.O. 240 VAC, 50 Amps/Pole 

COIL: 110VAC (60H, Inrush Current - 77 Watts, Sealed - 4.0 Watts)

AUXILIARY SWITCHES: One shoreline and one generator release switch, 120VAC, N.C.

PHYSICAL SIZE: 8” x 9” x 4-7/8” 

KNOCKOUTS: Assorted

TIME DELAY: Custom time delay, 30 seconds nominal, generator low voltage monitoring

WEIGHT: 13 lbs

 

UNIT ALSO AVAILABLE WITHOUT SURGE PROTECTION. WHEN ORDERING, USE PART # ES50-VOLT.

 

Cautions:

  • install vertically or horizontally in a dry, accessible area
  • consult factory before drilling metal case
  • keep covered except during wiring as contactors are sensitve to dust and debris
  • when hi-potting coach, disconnect es50-volt-surge or hi-pot on load side of switch. This unit has been hi-potted to ul standards at the factory

 * Additional shipping costs may apply.

Transfer Switch
$1,878.00
Add to Cart
  • Available
  • Ships within 1-2 days1
ES50M-65N Automatic Transfer Switch - Simple Design, Lower Cost

ES50M-65N Automatic Transfer Switch Features

  • Automatically switches from power cord to generator
  • Heavy duty contactor assembly specifically designed for rigorous use, will handle 50 amp power cord and up to 12kw generator
  • Transfers both hot and neutral legs simultaneously
  • Economical and reliable time delay switches automatically from shoreline to generator power
  • Capable of monitoring for low generator voltage
  • Built-in time delay allows generator to get up to speed
  • Quick and easy installation
  • Designed for OEM and aftermarket applications

 

The ES50M-65N is intended for use as an electrical transfer switch to automatically switch multiple sources (from one to another), i.e. switching from shoreline to generator power. It is primarily designed for installation in conjunction with a generator having a rated output no larger than 12KW and an external power cord having a rated output no larger than 2 pole, 240VAC, 50A, 1PH, 60HZ.

 

CONTACTORS: 3 Pole N.O. 240 VAC 50Amps/Pole 

PHYSICAL SIZE: 8 1/2" x 8 1/2" x 4 1/2"

COIL: 110VAC (60Hz, Inrush current - 77 Watts, Sealed - 4.0 Watts) 

KNOCKOUTS: Assorted

TIME DELAY: Custom time delay, 30 seconds nominal. Includes generator low voltage monitoring

WEIGHT: 8.5 lbs

 

CAUTIONS: : Install vertically or horizontally in a dry, accessible area. Consult factory before drilling metal case. Keep covered except during wiring as contactors are sensitive to dust and debris. When hi-potting coach, disconnect es50m-65n or hi-pot on load side of switch. This unit has been hi-potted to UL standards at the factory.

 

Transfer Switch
$477.23
Add to Cart
  • Available
  • Ships within 1-2 days1

Transfer Switch Accessories

ES30-ASM Accessories: Transfer Switch 30A revE

Please contact our staff for pricing (574) 264-4156, elkhartsupply@gmail.com

 

PART NO DESCRIPTION QTY
ES30-COVER Cover Label 1
ES30-FAULT 30A Fault current label 1
ES30-INST Installation instruction label 1
ES30-TORQUE Torque label 1
ES30AH-1 ES30 harness no capacitor 1
ES02 Red jumper harness 1
10BK-6 6 wire for ES3030 w/fork 1
10WH-6 6 in wire for ES3030 w/fork 1
QB22 Connector splicer 1
40050 Hinged box w/spec holes 1
604704A1-12 Time delay relay 1
20241-83 900 Model 30A DPDT 120Vac coil 1
CSA-LABEL CSA label for 50A & 30A switch 1
ES30BR Brown harness wire for ES30 1
ES30-ASM Accessory Kit
$0.00
Add to Cart
  • Sold Out
ES3030G Transfer Switch Accessories

Please contact our staff for pricing

(574) 264-4156, elkhartsupply@gmail.com

PART NO

DESCRIPTION

QTY

SPC8X8X4

8x8x4 Enclosure w/ Lid (Reflex)

1

20241-83

900 model 30A DPDT 120Vac coil

2

ES50-COVER

ES-50 cover label

1

ES3030G-INST

Instruction label-generator

1

CSA-LABEL

CSA label for 50A & 30A switch

1

ES30-TORQUE

Torque label

1

604704A1-12

Time delay relay

1

ES204-14RE

3 in for ES3030 I and G 14ga

4

10BK/OR-6

6 in wire for ES3030 w/ fork

2

10BK/YE-6

6 in wire for ES3030 w/ fork

2

10BK-6

6 wire for ES3030 w/ fork

2

10WH-6

6 in wire for ES3030 w/ fork

2

10WH/OR-6

6 in wire for ES3030 w/ fork

2

10WH/YE-6

6 in wire for ES3030 w/ fork

2

QB22

Connector splicer

2

ES3030G Transfer Switch Accessory Kit
$0.00
Add to Cart
  • Sold Out
ES3030I Transfer Switch Accessory Kit

Please contact our staff for pricing

(574) 264-4156, elkhartsupply@gmail.com

 

PART NO

DESCRIPTION

QTY

SPC8X8X4

8x8x4 Enclosure w/ Lid (Reflex)

1

20241-83

900 model 30A DPDT 120Vac coil

2

ES50-COVER

ES-50 cover label

1

ES3030I-INST

Instruction label-inverter

1

CSA-LABEL

CSA label for 50A & 30A switch

1

ES30-TORQUE

Torque label

1

S8301-1

Fuse holder

1

ES204-14RE

3 in for ES3030 I and G 14ga

4

10BK/OR-6

6 in wire for ES3030 w/ fork

2

10BK/YE-6

6 in wire for ES3030 w/ fork

2

10BK-6

6 wire for ES3030 w/ fork

2

10WH-6

6 in wire for ES3030 w/ fork

2

10WH/OR-6

6 in wire for ES3030 w/ fork

2

10WH/YE-6

6 in wire for ES3030 w/ fork

2

QB22

Connector splicer

2

ES3030I Transfer Switch Accessory Kit
$0.00
Add to Cart
  • Sold Out
ES350 Transfer Switch Accessory Kit

Please contact our staff for pricing

(574) 264-4156, elkhartsupply@gmail.com

 

PART NO DESCRIPTION QTY
ES350-INST ES350 installation label 1
ES30-TORQUE Torque label 1
ES202-14WH/RE 7 in for ES3030I 14ga 1
ES350-COVER ES350 cover label 1
S8301-1 1p 1/4x1 1/4 glass fuse holder 1
ES50-102BL 16ga blue wire for 50A switch 1
ES50-102BR 16ga brown wire for 50A switch 1
ES50-102OR 16ga orange wire for 50A switch 1
ES101-8BK7-1R 50A 8ga black power wire 4
ES101-6WH7-1R 6ga 65A white neutral w/1ring 2
ES101-6WH7-2R 6ga 65A white neutral 1
83-9591 Terminal Pak 14-12 female conn. 2
AGC3 Glass fuse 250V 1
CR355ADY5A 50A two speed contactor 1
AB12106HCGK-M 12x10x6 Enclosure w/Lid (Reflex) 1
R0562-A 50A DPDT relay 120Vac coil 1
10BK-6 6in wire for ES3030 w/fork black 1
10WH-6 6in wire for ES3030 w/fork white 1
B104-501 PCB assembly 50A board 1
ES201-14BK 14ga 12" with 2 forks 1
ES201-14BK/RE 14ga 8 1/2" for ES3030I 14GA 1
ES204-14RE 3in for ES3030 I & G 14ga 2
QB22 Connector splicer 3
ES350 Transfer Switch Accessory Kit
$0.00
Add to Cart
  • Sold Out
ES450G Special Construction Accessory Kit

Please contact our staff for pricing

(574) 264-4156, elkhartsupply@gmail.com

 

PART NO

DESCRIPTION

QTY

ES450G-INST

ES450G installation label

1

ES30-TORQUE

Torque label

1

ES50-COVER

ES-50 Cover label

1

ES101-8BK7-1R

50A 8ga black power wire

4

ES101-6WH7-1R

6ga 65A white neutral w/1ring

2

ES101-6WH7-2R

6ga 65A white neutral

1

CR353ADY39APAK

3 Pole 50A DP contactor

2

B122-501

TD Board For ES50M-65N

1

AB12106HCGK-M

12x10x6 Enclosure w/Lid (Reflex)

1

21082-84

Relay 23653-70 900QR-IC

1

21080-84

Relay 900QR

1

16BLF-90F-00

9" Blue Wire with 2 Fem. Disconn.

1

16BLF-60S8-00

6" Blue Wire w/Fem Disc & Spade

1

16BLF-90S8-00

9" Blue Wire w/Fem Disc & Spade

1

16BLF-90F-40F

Dbl Blue Wire - Fem Disc 9" & 4"

2

QN2-8

Ground Bar

1

LPT30-TIME

Time Delay TD 30

1

PLS-0002

Insulator Pan

1

ES450G Accessory Kit
$0.00
Add to Cart
  • Sold Out
ES50CSA-65N Transfer Switch Accessory Kit

Please contact our staff for pricing

(574) 264-4156, elkhartsupply@gmail.com

 

PART NO

DESCRIPTION

QTY

SPC8X8X4 1/2

50A T/F box black w/ spec holes

1

CR355ADY5A

50A two speed contactor

1

B104-501

PCB assembly 50A board

1

ES50-COVER

ES-50 cover label

1

ES50-65N-INST

Installation label for ES50 switch

1

ES30-TORQUE

Torque label

1

ES50-102BL

16ga blue wire for 50A switch

1

ES50-102BR

16ga brown wire for 50A switch

1

ES50-102OR

16ga orange wire for 50A switch

1

ES101-8BK7-1R

50A 8ga black power wire

2

ES101-6WH7-2R

6ga 65A white neutral 

1

QN2-6

6 hole neutral bar 50A T/F

1

ES50CSA-65N Transfer Switch Accessory Kit
$0.00
Add to Cart
  • Sold Out
ES50M-65N Transfer Switch Accessory Kit

Please contact our staff for pricing

(574) 264-4156, elkhartsupply@gmail.com

 

PART NO

DESCRIPTION

QTY

SPC8X8X4 1/2

50A T/F box black w/ spec holes

1

CR353ADY39APAK

3 Pole 50A DP contactor

1

B122-501

For the ES50M-65N

1

ES50-COVER

ES-50 cover label

1

ES50M-65N-INST

Installation label for ES50M switch

1

ES101-8BK7-1R

50A 8ga black power wire

2

ES101-6WH7-1R

6ga 65A white neutral 1 ring

1

QN2-6

6 hole neutral bar 50A T/F

1

ES30-TORQUE

Torque label

1

GE-LABEL

T label for GE ES50M-65N

1

ES50M-65N-LABEL

Outside label for ES50M-65N

1

CR353AD3BA1

40A generator contactor 110/120V

1

ES50M-65N Transfer Switch Accessory Kit
$0.00
Add to Cart
  • Sold Out
ES50M-EUROP Transfer Switch Accessory Kit

Please contact our staff for pricing

(574) 264-4156, elkhartsupply@gmail.com

 

PART NO

DESCRIPTION

QTY

SPC8X8X4 1/2

50A T/F box black w/ spec holes

1

CR353ADY39APAK

3 Pole 50A DP contactor

1

B222-501-EUROP

For the ES50M-EUROP

1

ES50-COVER

ES-50 cover label

1

ES50-65N-INST

Installation label for ES50 switch

1

ES101-8BK7-1R

50A 8ga black power wire

2

ES101-6WH7-1R

6ga 65A white neutral 1 ring

1

QN2-6

6 hole neutral bar 50A T/F

1

ES30-TORQUE

Torque label

1

GE-LABEL

T label for GE ES50M-65N

1

CR353AD3BA1

40A generator contactor 110/120V

1

B55-B31B

208/240 Volt Coil 

2

EUROP-LABEL

European label for ES50M-Europ

1

ES50M-EUROP Transfer Switch Accessory Kit
$0.00
Add to Cart
  • Sold Out
ES50-SURGE Transfer Switch Accessory Kit

Please contact our staff for pricing

(574) 264-4156, elkhartsupply@gmail.com

 

PART NO

DESCRIPTION

QTY

SPC8X8X4 1/2

50A T/F box black w/ spec holes

1

CR355ADY5A

50A two speed contactor

1

B104-501

PCB assembly 50A board

1

ES50-COVER

ES-50 cover label

1

ES50-65N-INST

Installation label for ES50 switch

1

ES30-TORQUE

Torque label

1

ES50-102BL

16ga blue wire for 50A switch

1

ES50-102BR

16ga brown wire for 50A switch

1

ES50-102OR

16ga orange wire for 50A switch

1

ES101-8BK7-1R

50A 8ga black power wire

2

ES101-6WH7-2R

6ga 65A white neutral 

1

QN2-6

6 hole neutral bar 50A T/F

1

LN102

802 3/4 locknut

1

32120-1

Panel mount surge suppressor

1

WA132

Reducer washer 1x3/4 8122

2

ES50-SURGE Transfer Switch Accessory Kit
$0.00
Add to Cart
  • Sold Out
ES50-VOLT Transfer Switch Accessory Kit

Please contact our staff for pricing

(574) 264-4156, elkhartsupply@gmail.com

 

PART NO

DESCRIPTION

QTY

SPC8X8X4 1/2

50A T/F box black w/ spec holes

1

CR355ADY5A

50A two speed contactor

1

B108-501

ES50-volt solid state board

1

ES50VOLT-COVR

ES50-volt cover label

1

ES50-65N-INST

Installation label for ES50 switch

1

ES50-102BL

16ga blue wire for 50A switch

1

ES50-102BR

16ga brown wire for 50A switch

1

ES101-8BK7-2R

50A 8ga black 2 ring for volt

2

ES101-6WH7-2R

6ga 65A white neutral 

1

QN2-8

8 hole neutral bar T/F sw

1

ES30-TORQUE

Torque label

1

ES50-VOLT Transfer Switch Accessory Kit
$0.00
Add to Cart
  • Sold Out
ES50-VOLT-SURGE Transfer Switch Accessory Kit

Please contact our staff for pricing

(574) 264-4156, elkhartsupply@gmail.com

 

PART NO

DESCRIPTION

QTY

SPC8X8X4 1/2

50A T/F box black w/ spec holes

1

CR355ADY5A

50A two speed contactor

1

B108-501

ES50-volt solid state board

1

ES50VOLT-COVR

ES50-volt cover label

1

LN102

802 3/4 locknut

1

32120-1

Panel mount surge suppressor

1

ES50-65N-INST

Installation label for ES50 switch

1

ES50-102BL

16ga blue wire for 50A switch

1

ES50-102BR

16ga brown wire for 50A switch

1

ES101-8BK7-2R

50A 8ga black 2 ring for volt

2

ES101-6WH7-2R

6ga 65A white neutral 

1

QN2-8

8 hole neutral bar T/F sw

1

WA132

Reducer washer 1x3/4 8122

2

ES30-TORQUE

Torque label

1

ES50-VOLT-SURGE Transfer Switch Accessory Kit
$0.00
Add to Cart
  • Sold Out